CATOS 8.6 unable to define auto config file

pankajs · ‎09-21-2009

I copied configuration from SUP1 and put it in SUP2 bootflash.

When I use command set boot auto-config bootflash:sup.cfg, it gives me following message.

Warning: file found but it is not a valid config file

Appreciate any suggestions.

Thanks!!

Mark Yeates · ‎09-21-2009

Pankaj,

Are you sure that you have your configuration stored on bootflash titled sup.cfg?

HTH,

Mark

pankajs · ‎09-22-2009

Yes.

Directory of bootflash:/

-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. ffffffff bc7dcdfa 102850c 26 16417932 Aug 14 2009 19:31:52 cat6000-sup2cvk9.8-6-4.bin

2 .. ffffffff f870e80a 1041e98 16 104715 Feb 02 2000 13:06:15 w2_sup_21Sep.cfg

3 .. 1 6aa1cb85 1044830 13 10520 Feb 02 2000 13:13:24 w2_sup_22.cfg

15448016 bytes available (16533552 bytes used)

6509-1> (enable) set boot auto-config bootflash:w2_sup_21Sep.cfg

Warning: file found but it is not a valid config file.

Thanks!!

YANGCCIE4 · ‎09-22-2009

one possibility is the problem of notepad ? the character-set is not recognized

how about change another text-editor and try again.

hope it help

Yang

pankajs · ‎09-22-2009

It doesn't work even if I TFTP a file from another SUP to this SUP with no modification.

Thanks!