cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
327
Views
0
Helpful
3
Replies

Remote VPN Access

vinoth.kumar
Level 1
Level 1

Hi,

I have created a Remote VPN in PIX 515E 7.0 and issue is we are getting connected to the VPN but not able to access the servers sometimes

When i try connecting from my home its getting connected to VPN aswell as servers but when i try from remote office iam not able to access the servers when i connected after sometimes same is connecting

why this improper responce

its may be due to Client version

Due to some ISP

and i same heard from some of my remote users

can u suggest us why this is

3 Replies 3

Alexandro Carrasquedo
Cisco Employee
Cisco Employee

can you ping the remote servers when you're not able to connect? ... you may try to use transport-mode to reduce the overhead or reduce the mss on the pix.

acomiskey
Level 10
Level 10

Make sure you have this command in the pix.

isakmp nat-traversal

or

crypto isakmp nat-traversal

If that doesn't help, post the config.

Thanks for your reply

yes i deployed the command and waiting for the responnce from my clients

can i know what exactly this command will do ? and

why this issue is happened without deploying this command?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: