cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1724
Views
5
Helpful
9
Replies

7970 Bricked ?

mitchdawson
Level 1
Level 1

Hi All,

Has anyone had any issues with 7970G phones coming up blank after an upgrade to UCM 6.0.1 ? We have had three phones all go down when registering against the new version. The line,headset and mute lights come on but there is no output on the diplay to indicate whats happening - its completely blank, and stays that way.

Cheers

Mitch

9 Replies 9

paolo bevilacqua
Hall of Fame
Hall of Fame

Either phone doesn't receive right dhcp options, cannot contact TFTP server, or TFTP server doesn't have term70.default.loads and individual FW files.

I never seen a phone really bricked so far.

Hi,

I actually tried something stupid. Maybe I did not realise it while i did it but later on knew that both phones are now useless. I tried factory resetting my 7970 phones without a power brick. Now i just have 2 phones which just wont boot up. I tried everything I found on teh internet. tired using uploading load files using cme4.3 and cucm 4.3. tried upgrading firmware with the latest firware but it is just stuck and after about 3 months i now feel that i've lost my phones for good. all that happens is the line buttons keep blinking and the headset button is green and the mute button is red. When i tried using call manager express, i used a debug on the router and i can see phone asking for an ip address and also for teh firmware and my tftp providing it. after all that is finished i see no outputs and the phone still wont start. the screen is blank and i cant see anything on it. tried teh factory reset and all other possible things but still stuck. COULD SOMEONE PLEEASE HELP ME OUT.!!!

Use older firmware, like 7.x or 6.x

Really never???  I had a pallet of phones get speared by a forklift once and that yielded some bricked phones

(This was for Paolo)

rustomhind
Level 1
Level 1

today i tried my phone again using tftpd and firware files and this is what i logged

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:24:54:06:9C:73 [02/09 17:19:20.203]

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:24:54:06:9C:73 [02/09 17:19:28.203]

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:11:BB:1B:C9:22 [02/09 17:19:35.828]

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:11:BB:1B:C9:22 [02/09 17:19:39.828]

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:11:BB:1B:C9:22 [02/09 17:19:47.906]

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:24:54:06:9C:73 [02/09 17:19:56.328]

Client requested address 10.0.0.2 [02/09 17:19:56.328]

Suppress pingable address 10.0.0.2 [02/09 17:19:56.531]

DHCP: proposed address 10.0.0.1 [02/09 17:19:58.062]

3832 Request 2 not processed [02/09 17:19:58.125]

3832 Request 2 not processed [02/09 17:19:58.171]

3832 Request 2 not processed [02/09 17:19:58.234]

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:24:54:06:9C:73 [02/09 17:20:01.093]

Client requested address 10.0.0.2 [02/09 17:20:01.093]

Freeing item 10.0.0.1 00:24:54:06:9C:73 [02/09 17:20:01.093]

DHCP: proposed address 10.0.0.1 [02/09 17:20:02.609]

Message truncated (length was 8) [02/09 17:20:02.671]

3832 Request 2 not processed [02/09 17:20:03.218]

3832 Request 2 not processed [02/09 17:20:03.281]

3832 Request 2 not processed [02/09 17:20:03.328]

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:24:54:06:9C:73 [02/09 17:20:10.625]

Client requested address 10.0.0.2 [02/09 17:20:10.640]

Freeing item 10.0.0.1 00:24:54:06:9C:73 [02/09 17:20:10.640]

DHCP: proposed address 10.0.0.1 [02/09 17:20:12.203]

Message truncated (length was 8) [02/09 17:20:12.250]

3832 Request 2 not processed [02/09 17:20:12.812]

3832 Request 2 not processed [02/09 17:20:12.859]

3832 Request 2 not processed [02/09 17:20:12.906]

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:24:54:06:9C:73 [02/09 17:20:12.968]

Previously allocated address 10.0.0.1 acked [02/09 17:20:14.468]

3832 Request 2 not processed [02/09 17:20:14.546]

3832 Request 2 not processed [02/09 17:20:14.593]

3832 Request 2 not processed [02/09 17:20:14.640]

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:11:BB:1B:C9:22 [02/09 17:20:30.515]

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:11:BB:1B:C9:22 [02/09 17:21:02.546]

DHCP: proposed address 10.0.0.3 [02/09 17:21:04.796]

3832 Request 2 not processed [02/09 17:21:04.859]

3832 Request 2 not processed [02/09 17:21:04.906]

3832 Request 2 not processed [02/09 17:21:04.968]

Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:11:BB:1B:C9:22 [02/09 17:21:05.015]

Previously allocated address 10.0.0.3 acked [02/09 17:21:06.515]

3832 Request 2 not processed [02/09 17:21:06.578]

3832 Request 2 not processed [02/09 17:21:06.640]

3832 Request 2 not processed [02/09 17:21:06.687]

Connection received from 10.0.0.3 on port 1027 [02/09 17:21:57.703]

Read request for file . Mode octet [02/09 17:21:57.703]

Using local port 1516 [02/09 17:21:57.703]

: sent 2 blks, 642 bytes in 0 s. 0 blk resent [02/09 17:21:57.765]

Connection received from 10.0.0.3 on port 1030 [02/09 17:22:45.953]

Read request for file . Mode octet [02/09 17:22:45.968]

Using local port 1517 [02/09 17:22:45.984]

: sent 928 blks, 474957 bytes in 2 s. 0 blk resent [02/09 17:22:47.671]

Connection received from 10.0.0.3 on port 1033 [02/09 17:23:36.953]

Read request for file . Mode octet [02/09 17:23:36.968]

Using local port 1518 [02/09 17:23:36.968]

: sent 851 blks, 435605 bytes in 2 s. 0 blk resent [02/09 17:23:38.437]

Connection received from 10.0.0.3 on port 1036 [02/09 17:24:27.859]

Read request for file . Mode octet [02/09 17:24:27.875]

Using local port 1519 [02/09 17:24:27.890]

Peer returns ERROR -> aborting transfer [02/09 17:24:34.750]

why do i receive this error.
thanks in advance.

Try an older firmware version, 6.x or 7.x

Also try alternate reset sequence.

woooooooooooooooooo!!!!!!!! after almost 6 months of trying to get a 7970 unbricked,  i successfully have done it!!! thanks a lot fellas!!!!!

Very good, please remember to rate useful posts clicking on the stars below.

Hi,

thanks a lot fellas for helping me out with unbericking my 7970... if anyone else needs help with their phone or is stuck plz feel free to contact me at rustomhind@gmail.com

cheers!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: