dhcp pool for vlan no native

lformelli · ‎09-22-2009

Hi,

I need to give ip addresses at an a Vlan (4) which isn't native on my switch and

not even management.

This command below are for native vlan.

How have to I modify it for another vlan configured on my switch ?

Can anybody advice me an a document about ?

Best regards

Lorenzo

interface vlan1

ip address 192.168.22.1 255.255.255.0

ip dhcp pool myvlan

network 192.168.22.128 255.255.255.128

dns-server 192.168.1.13 192.168.1.6

default-router 192.168.22.254

lease 10

MUHAMMAD SHAHEEN · ‎09-22-2009

Hi Lorenzo,

You need to add new configuration, the same way as you have for the existing IP range. For example

ip dhcp excuded-address 192.168.200.1

interface vlan4

ip address 192.168.200.1 255.255.255.0

ip dhcp pool NewVlan4

network 192.168.200.0 255.255.255.0

dns-server 192.168.1.13 192.168.1.6

default-router 192.168.200.1

lease 10

Here I am assuming your new range will be 192.168.200.1/24 in VLAN4.

Hope this helps... please rate all helpfull posts.

Shaheen

lformelli · ‎09-22-2009

Hi Shaheen ,

can I add this command

at my existing configuration ?

best regards

Lorenzo

Lucien Avramov · ‎09-22-2009

You can add as many networks statements as you want for DNS.

Basically the interface on a subnet A will provide DHCP as a DHCP server if there is a network statement for this subnet A under the DHCP pool.