09-22-2009 07:50 AM - edited 07-03-2021 06:04 PM
Hi All,
I have configured tacacs for WLC. But I am not able to login to WLC using TACACS username and password.
Getting following message
Tue Sep 22 15:26:50 2009: Forwarding request to 10.0.0.1
6 port=49
Tue Sep 22 15:26:50 2009: tplus response: type=1 seq_no=2 session_id=ecf27238 le
ngth=6 encrypted=0
Tue Sep 22 15:26:50 2009: TPLUS_AUTHEN_STATUS = UNKNOWN(1)
Thanks
Jamal.S
09-22-2009 08:11 AM
Please turn on the WLC CLI:
debug aaa all enable
And post the output
Are you using ACS as a TACACS server?
09-22-2009 08:21 AM
09-22-2009 09:23 AM
There is radius happening on the auth portion of the WLC.
There seems to be a misconfiguration issue.
What do the ACS failed logs say?
Can you make sure you followed exactly:
http://cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wpmkr1261119
09-23-2009 11:24 AM
Hi..
The problem is fixed now...Actaully there is a TACACS Key mismatch between ACS and WLC.
Thanks a lot for your wonderful support.
09-23-2009 11:25 AM
Great!
I guess we can mark this post resolved then.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: