09-22-2009 07:50 AM - edited 07-03-2021 06:04 PM
Hi All,
I have configured tacacs for WLC. But I am not able to login to WLC using TACACS username and password.
Getting following message
Tue Sep 22 15:26:50 2009: Forwarding request to 10.0.0.1
6 port=49
Tue Sep 22 15:26:50 2009: tplus response: type=1 seq_no=2 session_id=ecf27238 le
ngth=6 encrypted=0
Tue Sep 22 15:26:50 2009: TPLUS_AUTHEN_STATUS = UNKNOWN(1)
Thanks
Jamal.S
09-22-2009 08:11 AM
Please turn on the WLC CLI:
debug aaa all enable
And post the output
Are you using ACS as a TACACS server?
09-22-2009 08:21 AM
09-22-2009 09:23 AM
There is radius happening on the auth portion of the WLC.
There seems to be a misconfiguration issue.
What do the ACS failed logs say?
Can you make sure you followed exactly:
http://cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wpmkr1261119
09-23-2009 11:24 AM
Hi..
The problem is fixed now...Actaully there is a TACACS Key mismatch between ACS and WLC.
Thanks a lot for your wonderful support.
09-23-2009 11:25 AM
Great!
I guess we can mark this post resolved then.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide