CME outgoing display-ie

Unanswered Question
Sep 24th, 2009
User Badges:

Have CME router connected to call manager via qsig trunk. Outbound calls from CME are not displaying caller ID name to call manager. What am I missing?


interface Serial0/2/0:23

no ip address

encapsulation hdlc

isdn switch-type primary-qsig

isdn incoming-voice voice

isdn supp-service name calling profile Network-Extensions operation-value-tag local

isdn outgoing display-ie

no cdp enable



ephone-dn 17 octo-line

number 3001

label 3001 SCCP CUCME

description 3214-3001



ephone 7

device-security-mode none

description 3001 SCCP CUCME

mac-address 0015.2BC7.E368

ephone-template 1

max-calls-per-button 5

busy-trigger-per-button 3

type 7940

button 1:17 2:11




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Thu, 09/24/2009 - 07:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Check "debug isdn q931" but logic says the calling name is there, in two formats possibly.


BTW why don't you just use H.323 to trunk to CUCM ?

casey1hunter Thu, 09/24/2009 - 07:23
User Badges:

studying for IE lab


Channel ID i = 0xA98385

Exclusive, Channel 5

Progress Ind i = 0x8183 - Origination address is non-ISDN

Calling Party Number i = 0x0080, '3001'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '3335002'

Plan:Unknown, Type:Unknown




Paolo Bevilacqua Thu, 09/24/2009 - 10:13
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Name not being sent, try


voice service voip

qsig decode

Actions

This Discussion