09-24-2009 07:11 AM - edited 03-15-2019 07:51 PM
Have CME router connected to call manager via qsig trunk. Outbound calls from CME are not displaying caller ID name to call manager. What am I missing?
interface Serial0/2/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn incoming-voice voice
isdn supp-service name calling profile Network-Extensions operation-value-tag local
isdn outgoing display-ie
no cdp enable
ephone-dn 17 octo-line
number 3001
label 3001 SCCP CUCME
description 3214-3001
ephone 7
device-security-mode none
description 3001 SCCP CUCME
mac-address 0015.2BC7.E368
ephone-template 1
max-calls-per-button 5
busy-trigger-per-button 3
type 7940
button 1:17 2:11
09-24-2009 07:14 AM
Check "debug isdn q931" but logic says the calling name is there, in two formats possibly.
BTW why don't you just use H.323 to trunk to CUCM ?
09-24-2009 07:23 AM
studying for IE lab
Channel ID i = 0xA98385
Exclusive, Channel 5
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '3001'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '3335002'
Plan:Unknown, Type:Unknown
09-24-2009 10:13 AM
Name not being sent, try
voice service voip
qsig decode
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: