CME outgoing display-ie

casey1hunter · ‎09-24-2009

Have CME router connected to call manager via qsig trunk. Outbound calls from CME are not displaying caller ID name to call manager. What am I missing?

interface Serial0/2/0:23

no ip address

encapsulation hdlc

isdn switch-type primary-qsig

isdn incoming-voice voice

isdn supp-service name calling profile Network-Extensions operation-value-tag local

isdn outgoing display-ie

no cdp enable

ephone-dn 17 octo-line

number 3001

label 3001 SCCP CUCME

description 3214-3001

ephone 7

device-security-mode none

description 3001 SCCP CUCME

mac-address 0015.2BC7.E368

ephone-template 1

max-calls-per-button 5

busy-trigger-per-button 3

type 7940

button 1:17 2:11

paolo bevilacqua · ‎09-24-2009

Check "debug isdn q931" but logic says the calling name is there, in two formats possibly.

BTW why don't you just use H.323 to trunk to CUCM ?

casey1hunter · ‎09-24-2009

studying for IE lab

Channel ID i = 0xA98385

Exclusive, Channel 5

Progress Ind i = 0x8183 - Origination address is non-ISDN

Calling Party Number i = 0x0080, '3001'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '3335002'

Plan:Unknown, Type:Unknown

paolo bevilacqua · ‎09-24-2009

Name not being sent, try

voice service voip

qsig decode