Displaying a calling number at Cisco IP Phone depending on it's location

Unanswered Question
Sep 24th, 2009
User Badges:

Help me, please, with following problem:


There is a CUCM6.1


CUCM <--> GW2821 <<-E1->> PSTN


There are two different extensions for a local calls and calls between cities.


For a local call an IP phone abonent uses 9<tel num>

For a call to another city IP phone abonent uses 8<city code><tel num>


When a user of IP phone receives a call it is dispayed: 8<city code><tel num> (just adds 8 before 10 digits)


how to do on CUCM that the call will display like 9<tel num> if a user receives it from a local city and 8<city code><tel num> in other cases?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 09/25/2009 - 02:12
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Are you using H.323 or MGCP ?



Nicholas Matthews Fri, 09/25/2009 - 07:36
User Badges:
  • Red, 2250 points or more

I would take a look at these advanced CUCM service parameters:



Incoming Calling Party National Number Prefix - Phone

Incoming Calling Party International Number Prefix - Phone

Incoming Calling Party Subscriber Number Prefix - Phone

Incoming Calling Party Unknown Number Prefix - Phone


This appears to be what you're looking for.


-nick

vyacheslav.k Sun, 10/18/2009 - 22:12
User Badges:

Where are there these parameters in? System -> Service Parameters ?


Should I install a dial plan for my country to use it ?

iptuser55 Mon, 10/19/2009 - 23:21
User Badges:
  • Silver, 250 points or more

It is not dependent on a dial plan , you just need to make sure what parameter is used of what type of call. Also it is a glabal setting so if you have a clutser across countries or different access codes for sites then it will not work for you

vyacheslav.k Mon, 10/19/2009 - 23:26
User Badges:

maybe is there another way to do it ?

something like conditions, for instance, if a caller number is (2822)532123 then display it on phones as 8(2822)532123, but if a caller number is (2800)234412 display it as 9234412 ?

are translation rules convenient for this task?

Actions

This Discussion