Solved: Can't group pickup on pilot number

lumguanyuan · ‎09-24-2009

Dear All,

I had a PSTN number match to 1 hunt group, when outside phone call to the pstn number it will hunt for the internal phone. During the hunt i can't group pickup. Only 1 pickup group define in the system. My UC520 is CME7.0. Using internal phone test pickup group working fine.

ross_rulz · ‎09-24-2009

Hey mate,

Check this out:

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Phone%20Services%20for%20End%20Users&topicID=.ee6c82d&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cbede1c

hope this helps

Ross.

View solution in original post

Jaime Valencia · ‎09-24-2009

That's WAD, you cannot pickup calls that come from hunt groups.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

lumguanyuan · ‎09-24-2009

Hi Java,

This working in CME4.3. My customer have 2 office, one using UC520 with CME4.3 it work fine. The new office use UC520 with CME7.0 can't work.

Do you have document supporting because I need to let my customer know. Sure it will ask for this.

What is the meaning for "WAD".

ross_rulz · ‎09-24-2009