Hi All,

â–  HW & SW

・PIX 515-E

・6.3(5)

It sets the following configuration.

"logging on"

"logging timestamp"

"logging console debugging"

"logging buffered debugging"

The output of "show logging" is following.

-----

pixfirewall(config)# show logging

Syslog logging: enabled

Facility: 20

Timestamp logging: enabled

Standby logging: disabled

Console logging: level debugging, 15 messages logged

Monitor logging: disabled

Buffer logging: level debugging, 9 messages logged

Trap logging: disabled

History logging: disabled

Device ID: disabled

111008: User 'enable_15' executed the 'logging buffer 7' command.

111009: User 'enable_15' executed cmd: show logging

-----

I want to add timestamp to syslog message of " show logging "

---

(example)

Sep 25 05:43:54.820 JST: 111008: User 'enable_15' executed the 'logging buffer 7' command.

Sep 25 05:43:54.820 JST: 111009: User 'enable_15' executed cmd: show logging

---

Is such a setting possible?

Regards,

Reiji