ASA Missed Command

Unanswered Question
Sep 24th, 2009
User Badges:

hi everybody

I am new on the Cisco Security field, and i got a problem with an ASA that i have, thats the new one ASA 5520, i upgrade the IOS to 8.2 and its boot up, so some command is missed like ip address, and other usefull commands, can somebody let me know what wrong with that?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Collin Clark Fri, 09/25/2009 - 05:59
User Badges:
  • Purple, 4500 points or more

I'm not sure what you mean. Can you post what you are seeing in the console output?

CSCO11177524 Fri, 09/25/2009 - 06:12
User Badges:

ciscoasa# show ver | in Version

Cisco Adaptive Security Appliance Software Version 8.2(1)

Device Manager Version 5.2(4)

when i try to config the interface ip address:

ciscoasa(config)# interface gigabitEthernet 0/0

ciscoasa(config-if)# ip addr

ciscoasa(config-if)# ip addr ?

ERROR: % Unrecognized command

ciscoasa(config-if)# ip addr

ciscoasa(config-if)# nameif ?

ERROR: % Unrecognized command

ciscoasa(config-if)# nameif

I need to know why doenst appear that command?

Collin Clark Fri, 09/25/2009 - 06:17
User Badges:
  • Purple, 4500 points or more

Try creating a VLAN and then assign the physical interface to a VLAN-

ciscoasa(config)# vlan 5

ciscoasa(config-if)# nameif inside

ciscoasa(config-if)# ip address


ciscoasa(config)# int gi0/0

ciscoasa(config-if)# switchport access vlan 5


This Discussion