09-24-2009 11:58 PM - edited 02-21-2020 03:42 AM
hi everybody
I am new on the Cisco Security field, and i got a problem with an ASA that i have, thats the new one ASA 5520, i upgrade the IOS to 8.2 and its boot up, so some command is missed like ip address, and other usefull commands, can somebody let me know what wrong with that?
09-25-2009 05:59 AM
I'm not sure what you mean. Can you post what you are seeing in the console output?
09-25-2009 06:12 AM
ciscoasa# show ver | in Version
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 5.2(4)
when i try to config the interface ip address:
ciscoasa(config)# interface gigabitEthernet 0/0
ciscoasa(config-if)# ip addr
ciscoasa(config-if)# ip addr ?
ERROR: % Unrecognized command
ciscoasa(config-if)# ip addr
ciscoasa(config-if)# nameif ?
ERROR: % Unrecognized command
ciscoasa(config-if)# nameif
I need to know why doenst appear that command?
09-25-2009 06:17 AM
Try creating a VLAN and then assign the physical interface to a VLAN-
ciscoasa(config)# vlan 5
ciscoasa(config-if)# nameif inside
ciscoasa(config-if)# ip address 192.168.1.254 255.255.255.0
exit
ciscoasa(config)# int gi0/0
ciscoasa(config-if)# switchport access vlan 5
09-25-2009 06:25 AM
These should be some helpful links-
Description of Ports
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html#wp1072160
How to configure interfaces
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html#wp1125063
Configuring the switchports
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html#wp1088804
09-25-2009 03:30 PM
I will try that!
Thanks so much,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide