09-25-2009 12:50 AM
I have an ASA with a active IPSec LAN-to-LAN tunnel and I'm wanting to limit what ports and IPs my extranet partner is able to reach. How do I apply an ACL to a LAN-to-LAN tunnel to limit ingress and egress traffic through the tunnel?
Thanks in advance!
Solved! Go to Solution.
09-28-2009 10:21 AM
It will work similarly. You need to use VPN filters. If you are using 8.0, then you can use the following doc:
09-28-2009 10:23 AM
09-25-2009 06:04 AM
09-28-2009 09:43 AM
Thanks for the link but I am trying to limit access in regards to a LAN-to-LAN tunnel and not remote access. Any more thoughts?
Thanks in advance!
09-28-2009 10:21 AM
It will work similarly. You need to use VPN filters. If you are using 8.0, then you can use the following doc:
09-28-2009 10:23 AM
09-28-2009 10:49 AM
Thanks a lot guys, that was the info I needed! :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide