Static Command

Answered Question
Sep 25th, 2009
User Badges:

Hi Guys,


Could someone please explain the following command for me (if possible give me an example):


static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.0


Tks

Correct Answer by Kureli Sankar about 7 years 10 months ago


It should be either

static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.0


or


static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.255


Which says that the inside host (10.1.10.1) or network 10.1.10.0/24 can look like themselves when they talk to the DMZ1. This is called Identity translation.


You can read about it here:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/cfgnat.html#wp1043425

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Kureli Sankar Sat, 09/26/2009 - 04:51
User Badges:
  • Cisco Employee,


It should be either

static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.0


or


static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.255


Which says that the inside host (10.1.10.1) or network 10.1.10.0/24 can look like themselves when they talk to the DMZ1. This is called Identity translation.


You can read about it here:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/cfgnat.html#wp1043425

Actions

This Discussion