Question about Site-to-site VPN with two ASA 5505s

Unanswered Question
Sep 27th, 2009
User Badges:


I'm still what I would consider a newbie to ASAs. They're the first HW firewall I've worked with and have been using them for a few months successfully. Since I know absolutely nothing about VPNs, I figured I'd give the GUI a try.

First question: Step1, it asks me on what intrface will the VPN tunnel be. I suppose this should be the outside interface...

Step 5: it's asking me to define the local and remote networks that will take part of this tunnel.. Is this supposed to be the un-translated IPs???


I'm currently at step 5 of 6 where it asks me to specify the local and remote networks which will be communicating. I do believe this is meant to be the internal IPs, not the external ones

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
godinerik Sun, 09/27/2009 - 15:41
User Badges:

this was already replied, accidently posted a second thread about the same question.. if a mod sees this, this can be closed/deleted.


This Discussion