SSHv1 / SSHv2 support for Cisco IOS on VG224

Unanswered Question
Sep 28th, 2009
User Badges:

Hi


We are trying to configure the SSHv1 or SSH v2 on VG224 with vg224 Software (vg224-I6S-M), Version 12.4(12)(vg224-i6s-mz.124-12), however there doesnt seem to be any supported commands on the IOS release.


Anyone tried SSH configuration on VG224 analog gateways, and which IOS release to be used?


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
Jaime Valencia Mon, 09/28/2009 - 03:45
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

The IOS you're using does not support SSH

It needs the IP SUBSET/IPSEC 64 BIT/VOICE


The IOS name should contain a K9 in case it's enabled for it

IE

vg224-i6k9s-mz.124-15.T5.bin


HTH


java


if this helps, please rate

Nicholas Matthews Mon, 09/28/2009 - 07:15
User Badges:
  • Red, 2250 points or more

With the k9 image it will support both v1 and v2.



-nick

bberry Mon, 12/10/2012 - 13:27
User Badges:

I am running 12.4.22.T5 and can only get SSH V1 to operate. If I specify SSH V2 I get no connection. I am using a 2048 modulus on the key. Any thoughts?

Indu Gudipati Fri, 02/15/2013 - 12:30
User Badges:

We  have the same issue too, we have IOS  vg224-i6k9s-mz.150-1.M3.bin and higher on our VG 224's .

Never able to get SSH v2 working on the them, SSH v1 works fine .


also we use a modulus 1024 key .  Some body advise ??




---

Thanks,

Indu.

Actions

This Discussion