ASA for Bandwidth Control

Unanswered Question
Sep 28th, 2009
User Badges:

Hi all,


I have an ASA that is currently serving up a Public Network, I would like to limit the bandwidth. Can I does per user or per transport session. Also is there a way for me to block at layer 7.peer to peer and lime wire for example.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tprendergast Mon, 09/28/2009 - 13:15
User Badges:
  • Silver, 250 points or more

Yes, you can limit bandwidth on a per transport or per user session, as long as you know the IP address you wish to restrict. See the ASA Traffic Shaping & QoS Documentation here:

https://supportforums.cisco.com/docs/DOC-1230


Peer to peer blocking is also possible, but it is a bit more complex. Please read the doc here, as it explains it better than one can do on a message forum. :)


http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c38a6.shtml


Rate this post if it helps.


Cheers,

Tim

Actions

This Discussion