Jon Marshall Mon, 09/28/2009 - 13:19
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Sherman


The native vlan is the vlan that does not have a vlan tag attached to the packet when it is sent across a trunk link. By default the native vlan is vlan 1. You would use the "encapsulation dot1q native" if you wanted to change the default native vlan from vlan 1 to something else.


Jon

Actions

This Discussion