not able to configure ''switchport trunk encapsulation dot1q''

Answered Question
Sep 29th, 2009
User Badges:

on WS-X6148-GE-TX module installed in 6509


related information :

#sh module

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL10436BBF

2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL104369DS

3 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL10436BCD

4 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL104369E9

5 3 Supervisor Engine 32 10GE (Active) WS-SUP32-10GE-3B SAL1020NDWX

6 3 Supervisor Engine 32 10GE (Hot) WS-SUP32-10GE-3B SAL1020NDYA

7 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL11466XUY

8 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX SAD075100U2



SWE(config)#int Gi 8/15

SWE(config-if)#switchport mode trunk

SWE(config-if)#switchport trunk enca

SWE(config-if)#switchport trunk ?

allowed Set allowed VLAN characteristics when interface is in trunking mode

native Set trunking native characteristics when interface is in trunking mode

pruning Set pruning VLAN characteristics when interface is in trunking mode


Swe(config-if)#switchport trunk



Correct Answer by Jon Marshall about 7 years 6 months ago

Sanjay


The WS-X6148-GE-TX only supports 802.1q encapsulation and that is why you do not have the CLI option to set encapsulation.


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
Jon Marshall Tue, 09/29/2009 - 02:28
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Sanjay


The WS-X6148-GE-TX only supports 802.1q encapsulation and that is why you do not have the CLI option to set encapsulation.


Jon

sanjayraut Tue, 09/29/2009 - 02:56
User Badges:

Jon


Thanks for the prompt response.Actually

i have one migration activity sceduled

in this week, I have to connect HP blade

centre on the 6509 switch. The physical

connection needs to be done with WS-X6148-GE-TX module


Thanks again !

Actions

This Discussion