Cisco2509 Terminal Server

Unanswered Question
Sep 29th, 2009
User Badges:

please need your help.

when trying to connect to a router from the terminal server i got the following

LAB_TermSrvr#c1

Trying c1 (10.1.0.1, 2001)...

% Connection refused by remote host


i believe that the 2509 been configured correctly.



thank you.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Lucien Avramov Tue, 09/29/2009 - 12:16
User Badges:
  • Red, 2250 points or more

your configuration is fine. Are you sure there is a port 2001?


On the host using port 2001, do a show run and check the "line con0" command, make sure there are no access-lists applied.

mhasabal Tue, 09/29/2009 - 12:23
User Badges:

here is my lines config:

line con 0

logging synchronous

transport output telnet

line aux 0

transport output telnet

line vty 0 4

privilege level 15

password 7 (cisco)

logging synchronous

transport input telnet ssh

line vty 5 15

transport input telnet ssh

!

scheduler allocate 20000 1000


there is no ACL


ToddWarren Tue, 09/29/2009 - 12:58
User Badges:

Can you paste output of SHOW LINE? Never mind. Got it in the attachment.

Actions

This Discussion