×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

telnet inside

Answered Question
Sep 29th, 2009
User Badges:

I'm currently configuring ASA 5505 for external users. The ASA is working fine.

Just one thing...

I am not able to telnet the ASA from

a workstation inside the firewall.


i have added the following:

telnet 10.80.100.10 255.255.255.255 inside


and telnet timeout 5

i am not able to telnet from the host

address i have specified in the first

line. Something is Missing ?


thanks




Correct Answer by Collin Clark about 7 years 10 months ago

I believe it should be management access inside since you're using telnet.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Yudong Wu Tue, 09/29/2009 - 14:29
User Badges:
  • Gold, 750 points or more

Try add authentication in config

aaa authentication telnet console xxxx

Add user locally if you use LOCAL

desrochj1 Wed, 09/30/2009 - 07:55
User Badges:

i tried adding a local user and i still can't telnet my ASA.


The VPN is up and i can see my whole corporate network from the inside.


When i try to telnet the ASA from the corporate network it doesn't work.


Ive tried the packet tracer and it says

packet is drop by acl on the inside.

But my first rule on the inside is

any any ip permit...


any ideas ?



desrochj1 Wed, 09/30/2009 - 09:49
User Badges:

yes, i must cross the vpn tunnel

to reach the ASA i want to telnet.


i just added this command


management access outside


still doesn't work

Correct Answer
Collin Clark Wed, 09/30/2009 - 09:57
User Badges:
  • Purple, 4500 points or more

I believe it should be management access inside since you're using telnet.

desrochj1 Wed, 09/30/2009 - 10:42
User Badges:

thanks


management-access inside


i can now telnet my ASA

thanks


Actions

This Discussion