KonradStepniewski Wed, 09/30/2009 - 00:06
User Badges:
  • Silver, 250 points or more

You don't need any config when you use it with for example with T1/E1 line. You will need to create dspfarm for transcoder, so depends what you need.

cfajardo1_2 Wed, 09/30/2009 - 01:32
User Badges:

sounds interesting..but could you elaborate further pls

Adrian Saavedra Wed, 09/30/2009 - 06:41
User Badges:
  • Gold, 750 points or more


Voice termination applies to a call that has two call legs, one leg on a time-division multiplexing (TDM) interface and the second leg on a Voice over IP (VoIP) connection. The TDM leg must be terminated by hardware that performs coding/decoding and packetization of the stream. This termination function is performed by digital signal processor (DSP) resources residing in the same hardware module, blade, or platform. All DSP hardware on Cisco TDM gateways is capable of terminating voice streams, and certain hardware is also capable of performing other media resource functions such as conferencing or transcoding (see Audio Conferencing and Transcoding).

For more about Media Resources:


Hope it helps, if it does please rate.

Best regards,

- Adrián.

cfajardo1_2 Wed, 09/30/2009 - 07:26
User Badges:

thanks adrian..

if we say that a pvdm2-32 is used, how will the configuration looks like if we proposed to use it with

-voice termination

-as well as transcoder

-audio conference bridge

cfajardo1_2 Wed, 09/30/2009 - 08:47
User Badges:

thanks adrian..pls see my other post re; voice termination config..it is not mentioned on your above configuration examples


This Discussion