09-30-2009 08:08 AM - edited 03-21-2019 01:35 AM
Hi,
I didn't find any documentation about unified mobility (not extension mobility) for uc520. Uc520 supports this feature?
Thanks,
Janos
Solved! Go to Solution.
09-30-2009 01:24 PM
OK Yes.
This is available and configurable in the latest code release for UC540 and UC520, right from CCA 2.1 (the Cisco Configuration Assistant).
Every phone can have 1 alternate SNR line, and you pull the call back to the IP Phone when you want to as well via Softkey.
09-30-2009 08:17 AM
Hi,
Do you mean WiFi voice and data (and Guest Net) access, using WiFi voice phones like 7921, 7925, and SPA525G?
If so, Yes. Look for "Mobility Express". Its part of the SBCS suite including AP521s with WLC526 Controllers.
Steve D
09-30-2009 01:13 PM
Hi,
No, I need single number reach. If someone call this number, the desk phone (IP phone) and the mobile phone will ring too.
Janos
09-30-2009 01:24 PM
OK Yes.
This is available and configurable in the latest code release for UC540 and UC520, right from CCA 2.1 (the Cisco Configuration Assistant).
Every phone can have 1 alternate SNR line, and you pull the call back to the IP Phone when you want to as well via Softkey.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: