09-30-2009 09:31 AM - edited 03-10-2019 04:42 PM
Hi All,
I've setup ACS express as Radius server with local database. then add switch device in ACS with the key, create radius responses for idle-timeout, Cisco AVPair and session-timeout, then in access services, add device group with PAP/CHAP/MSCHAPv2 protocol with all the time. But when I try to login to switch by telnet, it says "authentication error". what else am I missing?
thanks
Alex
10-01-2009 05:49 AM
Hi Alex,
Have you checked, what error message are we getting on the ACS?
I think that shared-secret is mis-match. Please get this re-checked on both sides and see if that helps.
HTH
JK
10-01-2009 07:45 AM
thanks for the reply,
on ACS, only says authentication failed, and on the switch in "debug aaa authentication", only says reason unknow.
thanks again
Alex
10-25-2009 06:46 AM
What switch are you using?
Try assigning privilege 15.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: