09-30-2009 09:31 AM - edited 03-10-2019 04:42 PM
Hi All,
I've setup ACS express as Radius server with local database. then add switch device in ACS with the key, create radius responses for idle-timeout, Cisco AVPair and session-timeout, then in access services, add device group with PAP/CHAP/MSCHAPv2 protocol with all the time. But when I try to login to switch by telnet, it says "authentication error". what else am I missing?
thanks
Alex
10-01-2009 05:49 AM
Hi Alex,
Have you checked, what error message are we getting on the ACS?
I think that shared-secret is mis-match. Please get this re-checked on both sides and see if that helps.
HTH
JK
10-01-2009 07:45 AM
thanks for the reply,
on ACS, only says authentication failed, and on the switch in "debug aaa authentication", only says reason unknow.
thanks again
Alex
10-25-2009 06:46 AM
What switch are you using?
Try assigning privilege 15.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide