We have sip configured on our client's box. I was wondering if we could setup an outgoing calling plan where if i dial an international number specifically, it would not use the sip but go out through the analog line which would feed into vonage adapter. My client is interested in using vonage plan for outbound international calls and i was wondering if it could be setup with the uc520 in some way?
For FXO, I collected some screen shouts in Technical Enablement Lab #5 I believe....You can also separate into PSTN trunk Groups so only the one is in the international dial plan codes.
What type of connection would there be? If it is FXO, this is simple.
You could plug in one FXO port to the Vonage box. On the dial plan configuration, select PSTN only and shut down the other FXO ports that are not in use.
If you are using a SIP dial peer to the vonage box, you will have to use CLI to do the config. Find the dial peer that works for international calls and change the session target to the IP of the vonage box.