cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
423
Views
0
Helpful
2
Replies

PIX 525 arp issue

rc.castillo
Level 1
Level 1

Hi,

I've been experiencing problem with my standby pix. My outside interface becomes unavailabl after 4 hours (arp cache. I have to clear my arp table for me to access it again.

My pix is connected to a switch. 2 routers with HSRP config and the primary pix is also connected via this switch.

Stateful Failover Logical Update Statistics

Link : stateful

Stateful Obj xmit xerr rcv rerr

General 234413 0 98283969 0

sys cmd 234413 0 234413 0

up time 0 0 2 0

xlate 0 0 4672 0

tcp conn 0 0 98044436 0

udp conn 0 0 446 0

ARP tbl 0 0 0 0

RIP Tbl 0 0 0 0

from the table it seems that the arp table of the standby doesnt get refresh.

Also, i am receiving these logs

405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside

405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside

405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside

405001: Received ARP response collision from x.x.x.x/000d.xxxx.xxxx on interface outside

405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside

405001: Received ARP response collision from x.x.x.x/000d.xxxx.xxxx on interface outside

is this the cause why the arp table counter doesnt have a value? whats the work around for this? hope someone could help.

Thanks

2 Replies 2

rc.castillo
Level 1
Level 1

Another issue that im having is that from standby pix why is it that the mac of the primary is being used by the mac of VIP of the router?

jiaowenbin
Level 1
Level 1

static arp binding can resolve your issue

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: