cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4696
Views
0
Helpful
2
Replies

logging reload

secureIT
Level 4
Level 4

Hi,

Will the below command give reboot messages in the syslog server or ciscoworks server ? Unless specified the below, wont we get the reboot log messages in syslog or ciscoworks servers ? Pls let me know

config t

logging reload notification

Right now we have not enabled the above command.

~PR

2 Replies 2

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Rajesh,

if you use TACACS+ servers with aaa new-model on devices you can trace what commands are placed on device and by who

example:

aaa new-model

!

!

aaa authentication login ACS group tacacs+ local

aaa authentication enable default group tacacs+ enable

aaa accounting update newinfo

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

!

aaa session-id common

!

the key point is to have a message to be sent before reload happens

I cannot find the command

logging reload notification

in 12.4 mainline network management command reference.

Hope to help

Giuseppe

Leo Laohoo
Hall of Fame
Hall of Fame

Make sure logging to a syslog is enabled. Then try the following:

archive

log config

logging enable

notify syslog contenttype plaintext

hidekeys

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: