cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
675
Views
0
Helpful
2
Replies

block multicast on a single interface of 3560 switch?

gmtimmons
Level 1
Level 1

I have a 3560 in the shop that several plc devices are connected to. Port fa/03 jumps to a third party switch for the a group of plcs and they multicast heavy. I would like to block port 3 on my 3560 to keep it from forwarding it to the rest of the network. Thought the 3560 blocked multicast by default, but apparently I am mistaken...thanks in advance

interface FastEthernet0/3

switchport access vlan 33

spanning-tree portfast

2 Replies 2

rducombl
Cisco Employee
Cisco Employee

did you try :

switchport block multicast

Configured on fas 0/3 that will prevent to forward multicast out of that port

Roland

yes I tried it on fa0/3 and the fiber port gi0/1 still coming through Its odd there are other ports multicasting but are saying put on that switch as they should Its just the traffic from fa0/3 that i can see on wireshark

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: