Configuration Cisco IP Phone

Unanswered Question
Oct 2nd, 2009
User Badges:

Hello,


I have a Cisco UC520, Cisco IP Phones (7911, 7941, 7931) and my switched network is done with Nortel BES 1010.


I have configured two VLAN (voice and data), and a trunk between the UC520 and the Nortel Switch.


I don't Know how to configure on the Cisco IP Phone, the VLAN voice PVID.



When I make the test with Cisco switch, it's ok with command #switchport voice vlan 100, CDP detect autommatically the IP Phone.

How to configure the IP Phone with the VLAN voice PVID physically on the Cisco IP Phone?

Thanks for your help.

LC

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Harper Fri, 10/02/2009 - 00:31
User Badges:
  • Cisco Employee,

On the phone, select Settings > Network Setting > Admin VLAN ID.  To edit this field you will invariably need to unlock the settings by keying in '**#' first.


Cheers,

Dave.

Actions

This Discussion