cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1602
Views
0
Helpful
2
Replies

Show Power Inline command

jefferyj40
Level 1
Level 1

We have new cisco ip phones which will be installed, about 2000 phone to our existing network. We noticed that when we install phones with the power cube adapter and then connect the POE switch port last that the phones take power from the cube and not the switch. It looks like the first source of power, either from the switch or the power cube will remain as the primary source of power. It doesn't switch to the power cube when you reconnect the LAN. Is this the norm?

Also, the show power inline command for the interfaces is this a true reading ? If I start with the POE switch port and then move the power connection to the cube, then apply the "power inline never" command . The power moves over to the cube, our these readings actual for the "show power inline" ?

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

Please detail which exact switch you have in full details.

cisco WS-C3750-24P running Version 12.2(25)SEE4

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: