10-02-2009 11:34 AM - edited 03-18-2019 10:42 AM
I have two CME systems connected using a SIP trunk. In both systems, SCCP was used as a signaling protocol. In that situation all works properly. Then, all phones in one site are converted to SIP. Local calls on this site work properly, but calls across the SIP trunk don't work. When calling from SIP side to SCCP side, a reorder tone is heard. When calling from SCCP side to SIP side, the phone at the SIP side rings but no voice is heard.
Any idea about how to solve it?
10-02-2009 12:28 PM
To avoid this kind of problems and more, leave phones in SCCP as they are designed and tested to be like that.
You will also able to retain you language localization that is Spanish if I'm not wrong.
10-05-2009 05:28 AM
Try these:
voice service voip
allow sip to sip
no supp sip refer
no supp sip moved
These are general practice SIP-SIP commands that offer higher reliability for supplementary services.
-nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide