10-03-2009 08:53 PM - edited 03-18-2019 10:43 AM
I hava install PUB first; name - cucumpub, IPAddres - 192.168.100.1 GW - 192.168.100.10
then try install SUB - ; name - cucmsub, ipaddress 192.168.100.2 GW - 192.168.100.10
I am not having DNS server in this installation, when I try to install SUB, it says name cucumpub does not exist, I am able to ping both server...from my switch and laptop, please light me how to install SUB ; pointing the PUB.
Solved! Go to Solution.
10-04-2009 06:09 AM
Hi Bala,
Just to add a note to the great tips from Gonz (+5 points my friend :)
When you perform a fresh installation of Cisco Unified Communications Manager, you must define any subsequent servers (nodes) in the Cisco Unified Communications Manager Administration Server Configuration window before you can install Cisco Unified Communications Manager on each subsequent server. To define a subsequent node, click Add New, and perform the procedure in the "Configuring a Server" section. After you add the subsequent server, you can then install the Cisco Unified Communications Manager software on that server.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b02servr.html#wp1020200
Installing Cisco Unified Communications Manager on a New Subscriber Server
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_0_1/cluster/clstr701.html#wp97669
Hope this helps!
Rob
10-03-2009 11:16 PM
did u already add sub under system server?
apart from not dns server, did u use dns suffix like cucmpub.cisco.com? if so thats the problem
if u got to pub do show network eth0 detail
and show status to show u all details
10-04-2009 12:27 AM
do you say before installing the SUB, should I add SUB ip address in Publisher, please correct me if my understanding is wrong. I will try that now.
10-04-2009 06:09 AM
Hi Bala,
Just to add a note to the great tips from Gonz (+5 points my friend :)
When you perform a fresh installation of Cisco Unified Communications Manager, you must define any subsequent servers (nodes) in the Cisco Unified Communications Manager Administration Server Configuration window before you can install Cisco Unified Communications Manager on each subsequent server. To define a subsequent node, click Add New, and perform the procedure in the "Configuring a Server" section. After you add the subsequent server, you can then install the Cisco Unified Communications Manager software on that server.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b02servr.html#wp1020200
Installing Cisco Unified Communications Manager on a New Subscriber Server
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_0_1/cluster/clstr701.html#wp97669
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: