CCA 2.1 - deleted AnyConnect pkgs during upgrade to 7.1.3

Unanswered Question
Oct 2nd, 2009
User Badges:

During 7.1.1 to 7.1.3 upgrade, the CCA deleted my AnyConnect pkgs.


I uploaded the pkg again, but still broken.


I configured through CCA, which meant I had to delete my current SSL, which it didn't recognize.  And, OF COURSE, it said it didn't recognize firewall settings so it couldn't finish the config.


I had to use CLI to add:


policy group SDM_WEBVPN_POLICY_1
   functions svc-enabled                               - when I change this to "functions svc-required" split tunneling doesn't work

   svc split include 192.168.0.0 255.255.255.0
   svc split include 10.1.1.0 255.255.255.0
   svc split include 10.1.10.0 255.255.255.252
   svc dns-server primary 192.168.0.2

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Tomoo Esaka Fri, 10/02/2009 - 19:45
User Badges:
  • Cisco Employee,

Hi,


If you configured SSL-VPN server through CLI, then you are correct that CCA will not recognize the OOB configuration. Is this a production system? Is restoring to factory default and reconfiguring SSL-VPN server and option for your setup?


Rgds,

Tomoo

oehveding Thu, 12/03/2009 - 00:17
User Badges:

Hi!


I'm trying to set up SSL VPN on a UC520.

Witch of the AnyConnect packages do I need to download for the installation in CCA?


Regards

Øystein

Steven Smith Thu, 12/03/2009 - 11:23
User Badges:
  • Gold, 750 points or more

You could try this one.

anyconnect-win-2.3.2016-k9.pkg