cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
582
Views
0
Helpful
5
Replies

LMS 3.1 CM Discrepancies

puk
Level 1
Level 1

Hi, is there any possibility how to purge all discrepancies which are already fixed? I know there is an Acknowledge option but would like to have an actual status without checking all the retired discrepancies.

Thanks for your ideas.

1 Accepted Solution

Accepted Solutions

Data Collection must not be picking up the correct VLAN information. It would probably be best to open a TAC service request so Data Collection debugging can be enabled. Alternatively, if there is stale data in the ANI database, reinitializing it, then running a new Data Collection could resolve this. To reinitialize the ANI database, run the command:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

View solution in original post

5 Replies 5

Joe Clarke
Cisco Employee
Cisco Employee

Discrepancies which are fixed will automatically clear on the next Campus Data Collection. You can also restart Daemon Manager, then run a new Data Collection which will cause Campus to rediscover all active discrepancies.

Thanks for your info. It looks logically but in our case it does not work. The discrepancies were fixed long long time ago and also after a lot of Campus Data Collections it is still there. What do you recommend? Open a TAC?

What is one of the discrepancies which are still active (include all details)?

Type Trunk VLANs Mismatch

Severity Medium

First Found 30 Sep 2008, 12:18:44 CEST

Description [aaa,GigabitEthernet0/1], [bbb,GigabitEthernet8/5]

Detail This Trunk Link has ports with mismatching active VLAN sets.

Port GigabitEthernet0/1 on device aaa trunks following VLANs:

Device type and OS version of aaa:

Cisco IOS Software, C3550 Software (C3550-IPBASEK9-M), Version 12.2(40)SE, RELEASE SOFTWARE (fc3)

Port GigabitEthernet0/1 on device aaa does not trunk the following VLAN indices:

Device type and OS version of aaa:

Cisco IOS Software, C3550 Software (C3550-IPBASEK9-M), Version 12.2(40)SE, RELEASE SOFTWARE (fc3)

Index:9

Index:30

Index:15

Index:34

Port GigabitEthernet8/5 on device bbb trunks following VLANs:

Device type and OS version of bbb:

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF15a, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

SERVER1 present in VTP domain GEBC_3.193.44.7(T) and having index 15

PHONES3 present in VTP domain GEBC_3.193.44.7(T) and having index 9

SERVICE present in VTP domain GEBC_3.193.44.7(T) and having index 30

MGMT_SRV present in VTP domain GEBC_3.193.44.7(T) and having index 34

Note: This discrepancy does not hold good if devices on either end of the trunk support different number of vlans.

--------------

aaa#sh run int gi0/1

Building configuration...

Current configuration : 174 bytes

!

interface GigabitEthernet0/1

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 9,15,30,34

switchport mode trunk

end

--------------

bbb#sh run int gi8/5

Building configuration...

Current configuration : 262 bytes

!

interface GigabitEthernet8/5

switchport

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 9,15,30,34

switchport mode trunk

switchport nonegotiate

no ip address

udld port

spanning-tree guard root

end

Data Collection must not be picking up the correct VLAN information. It would probably be best to open a TAC service request so Data Collection debugging can be enabled. Alternatively, if there is stale data in the ANI database, reinitializing it, then running a new Data Collection could resolve this. To reinitialize the ANI database, run the command:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: