Quality of service for Voice Gateway

Unanswered Question
Oct 5th, 2009
User Badges:

Hi


We are implementing QoS for IP Telephony infrastructure. The IP Phones mark the packets for signalling and RTP. This would be for the traffic originating at the phone towards the voice gateway.


What and how should the marking happen for a call from PSTN towards the Ip phone? Is there separate marking to be done on the voice gateway or the switches.


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (2 ratings)
Loading.
paolo bevilacqua Mon, 10/05/2009 - 14:25
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Router sets the right value by default. With H.323 or SIP, you cahnge it under dial/peer. With MGCP, configure the CM for this.

Dennis Mink Mon, 10/05/2009 - 17:38
User Badges:
  • Gold, 750 points or more

what ever is doing the marking for RTP traffic coming from the Voice gateway:


add the following line to the access list that defines the required DSCP or presedence value:


permit udp any any range 16384 32767

Actions

This Discussion