SIP proxy or NAT on ASA?

Unanswered Question
Oct 5th, 2009
User Badges:

We need to bring in our SIP provider through a publicly addressed connetion and need to NAT it on the firewall. But the NAT only changes the source or destination address of the IP packet. How can we also NAT the SIP body messages for INVITE commands etc? Does the ASA support this? Thanks alot.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
chuck007 Mon, 10/05/2009 - 10:17
User Badges:

I did read through that, however it's mainly dealing with inspection as a firewall rather than the SIP translation of the IP address within the body of the packet. We have the basic NAT turned on, but it's not working because SIP embeds the IP inside. If you came across an example how to fix this, I would greatly appreciate it. Or maybe this type of packet translation is just not supported on the ASAs. Thanks.

chuck007 Mon, 10/05/2009 - 10:23
User Badges:

I did read through that, however it's mainly dealing with inspection as a firewall rather than the SIP translation of the IP address within the body of the packet. We have the basic NAT turned on, but it's not working because SIP embeds the IP inside. If you came across an example how to fix this, I would greatly appreciate it. Or maybe this type of packet translation is just not supported on the ASAs. Thanks.

Actions

This Discussion