Questions about CSR-1 configuration

Answered Question
Oct 5th, 2009
User Badges:

Hi, Pros,

Is anyone know what the major function about the following configurations "task" "taskgroup", in CSR-1

taskgroup priv12

task read fr

task read aaa

task read acl

task read atm

task read bfd

task read bgp

task read cdp

task read cef

task read ppp

task read qos

task read rib

task read rip

task read sbc

task read bcdl

task read boot

task read diag

task read hdlc

task read hsrp

task read ipv4

task read ipv6

task read isis

task read lpts

task read ospf

task read ouni

task read snmp

task read vlan

task read vrrp

task read admin

task read eigrp

task read l2vpn

task read bundle

task read crypto

task read fabric

task read static

task read sysmgr

task read system

task read tunnel

task read drivers

task read logging

task read monitor

task read mpls-te

task read netflow

task read network

task read pos-dpt

task read firewall

task read mpls-ldp

task read pkg-mgmt

task read fault-mgr

task read interface

task read inventory

task read multicast

task read route-map

task read sonet-sdh

task read transport

task read ext-access

task read filesystem

task read tty-access

task read config-mgmt

task read ip-services

task read mpls-static

task read route-policy

task read host-services

task read basic-services

task read config-services

task write basic-services

task execute basic-services

description Enable12 TaskGroup

!

taskgroup priv14

inherit taskgroup netadmin

description Enable14 Taskgroup

!

taskgroup priv15

inherit taskgroup root-system

description Enable15 Taskgroup

!

usergroup priv12

taskgroup priv12

description Enable12 Users

!

usergroup priv14

taskgroup priv14

description Enable14 Users


.....


actually it is a long list, but I just pasted the part of which I don't know,


Thank you in advance.



Yang


Correct Answer by Giuseppe Larosa about 7 years 7 months ago

Hello Yang,

it is a very detailed way to decide what users and user groups can do.


in your sample config there are tasks placed at privilege level 12 and others that inherit from built-in taskgroups


see


http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.8/security/configuration/guide/sc38aaa.html#wp1216211


Hope to help

Giuseppe


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Giuseppe Larosa Mon, 10/05/2009 - 11:53
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Yang,

it is a very detailed way to decide what users and user groups can do.


in your sample config there are tasks placed at privilege level 12 and others that inherit from built-in taskgroups


see


http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.8/security/configuration/guide/sc38aaa.html#wp1216211


Hope to help

Giuseppe


YANGCCIE4 Mon, 10/05/2009 - 12:16
User Badges:

Hi, Giuseppe,


Thank you for your help.


Best Regards,


Yang

Actions

This Discussion