×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CCM7.0(1) Called party Tranformation Pattern

Unanswered Question
Oct 5th, 2009
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi,


I am trying to use the "called party transformation pattern " on CCM 7.0(1) to manipulate my called number..


Eg I have a RP of 8.[2-9]XXXXXX and I created a called party xform pattern of 8.[2-9]XXXXXX, with a discard digit =predot and called number prefix of 9, so that I can prefix 9 on the called number.


For some reason callmanager is not xforming the called number. I am using this with device nobility so that roaming users can preserve their dialing pattern from their home location.


I have the checkbox "use device pool called party xformation css" checked on the gateway and I have also assign the required "called party xformation css" to the device pool.


Any help will be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Volodymyr Morskyy Tue, 10/06/2009 - 12:38
User Badges:
  • Bronze, 100 points or more

Why are you using xform mask, you can discard predot digit and add prefix in RP

Actions

This Discussion