cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2121
Views
0
Helpful
3
Replies

Missing commands for Telephony Service

damionlld
Level 1
Level 1

For some reason I am missing a lot of features when using the Voice side of my router. There are more commands missing than what I have listed. I listed a couple below CUCME 4.3 ((C3745-ADVENTERPRISEK9-M), Version 12.4(25)

1. I have a 7906 and I dont see the option for the firmware load. I used the load 7905 with the 7906 firmware but now the 7906 doesn't work correctly.

How can I see the options to load different firmware?

<loadInformation20000 model="IP Phone 7905">SCCP11.8-3-3S</loadInformation20000>

RT_3745(config-telephony)#load ?

12SP Select the firmware load file for 12SP+ and 30VIP phones

7902 Select the firmware load file for 7902

7905 Select the firmware load file for 7905

7910 Select the firmware load file for Telecaster 7910 phones

7912 Select the firmware load file for 7912

7914 Select the firmware load file for sidecar 7914

7920 Select the firmware load file for 7920

7935 Select the firmware load file for 7935 Conference Station

7936 Select the firmware load file for 7936

7960-7940 Select the firmware load file for Telecaster 7960 & 7940 phones

7970 Select the firmware load file for 7970

7971 Select the firmware load file for 7971

ATA Select the firmware load file for ATA

2. I dont see the option for auto-reg-ephone

RT_3745(config-telephony)#auto?

auto

RT_3745(config-telephony)#auto

3. I also get this error when trying to create cnf-files. This happened after I upgraded my router to 12.4(25). I can't delete them either. I switched back and the error went away. Any suggestions on how to change IOS versions without getting this error?

%Error deleting flash:SEPDEFAULT.cnf (No such file or directory)

%Error deleting flash:XMLDefault.cnf.xml (No such file or directory)

RT_3745#cd system:

RT_3745#delete /force XMLDefault.cnf.xml

%Error deleting system:XMLDefault.cnf.xml (Invalid argument)

RT_3745#

RT_3745(config-telephony)#no create cn

RT_3745(config-telephony)#no create cnf-files

CNF files deleted

RT_3745(config-telephony)#cre

RT_3745(config-telephony)#create cn

RT_3745(config-telephony)#create cnf-files

Creating CNF files

%Error deleting flash:SEPDEFAULT.cnf (No such file or directory)

%Error deleting flash:XMLDefault.cnf.xml (No such file or directory)

1 Accepted Solution

Accepted Solutions

Incorrect. You're not on CME 4.3, you're on an older CME version.

The most recent version is 12.4(15)T10

Try this and you should be fine.

-nick

View solution in original post

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Really upgrade to lastest T or YB and your problems should go away.

Downgraded to 12.4(6)T. Create CNF problems went away but the other commands are still unavailable. 12.4(25) is the newest IOS available for the 3745

Incorrect. You're not on CME 4.3, you're on an older CME version.

The most recent version is 12.4(15)T10

Try this and you should be fine.

-nick

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: