CDR records on CME

Answered Question
Oct 7th, 2009

Are there any CDR records stored on the CME router or do i need to setup Radius, SYSLOG or FTP? I know there is a log on the web interface, just wondered if you could pull the records off without one of the three methods. Thanks

I have this problem too.
0 votes
Correct Answer by Adam Thompson about 7 years 3 months ago

You can log CDRs to the router buffered memory. It makes them a little harder to read/interpet, but you don't have to have an external RADIUS/Syslog/FTP server to offload them to.

You can use the following commands in config mode:

logging buffered <>

dial-control-mib retain-timer <>

dial-control-mib max-size <>

To view them, use 'show logging'

Thanks,

Adam

Please rate if helpful

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Adam Thompson Thu, 10/08/2009 - 08:44

You can log CDRs to the router buffered memory. It makes them a little harder to read/interpet, but you don't have to have an external RADIUS/Syslog/FTP server to offload them to.

You can use the following commands in config mode:

logging buffered <>

dial-control-mib retain-timer <>

dial-control-mib max-size <>

To view them, use 'show logging'

Thanks,

Adam

Please rate if helpful

Actions

This Discussion