10-07-2009 05:32 PM - edited 03-18-2019 11:48 PM
Are there any CDR records stored on the CME router or do i need to setup Radius, SYSLOG or FTP? I know there is a log on the web interface, just wondered if you could pull the records off without one of the three methods. Thanks
Solved! Go to Solution.
10-08-2009 08:44 AM
You can log CDRs to the router buffered memory. It makes them a little harder to read/interpet, but you don't have to have an external RADIUS/Syslog/FTP server to offload them to.
You can use the following commands in config mode:
logging buffered <
dial-control-mib retain-timer <
dial-control-mib max-size <
To view them, use 'show logging'
Thanks,
Adam
Please rate if helpful
10-08-2009 08:44 AM
You can log CDRs to the router buffered memory. It makes them a little harder to read/interpet, but you don't have to have an external RADIUS/Syslog/FTP server to offload them to.
You can use the following commands in config mode:
logging buffered <
dial-control-mib retain-timer <
dial-control-mib max-size <
To view them, use 'show logging'
Thanks,
Adam
Please rate if helpful
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: