CUCM PUB/SUB License Unified CM 7.0 7816 Appliance

Answered Question
Oct 7th, 2009

We have PUB/SUB server 7816, we have

L-CM7.0-7816= License Unified CM 7.0 7816 Appliance - 500 two number sheet &

L-CM-DL-10= Unified CM Device License - 1000 number.

Question is to get register appliance & Unified CM Device License should I use only PUBLISHER mac address for both registration.

Could please some one light me about

Unified CM 7.0 7816 Appliance lic registration process for PUB/SUB.

I have this problem too.
0 votes
Correct Answer by rob.huffman about 7 years 3 months ago

Hi Bala,

You are most correct! All CUCM Licenses should reference the Publisher MAC. The License should reflect 2 Nodes, 1 for Pub and 1 for Sub. The Subscriber MAC should not be used here.

Cisco Licensing is very,very good about re-homing these licenses when required. Just send an email to;

[email protected]

Something like this;

We recently aquired licenses tied to PAK xxxxxxxxxxx for our CUCM 7.x cluster. We have a License tied to MAC CCCDDDAAABBB and now require the license to be re-homed to our Publisher MAC AAABBBCCCDDD accordingly. We mistakenly tied the license to our Subscriber MAC CCCDDDAAABBB

Here is the pertinent info;

End User Name - Bobmart.com

Legal Address

City,Country

Purchase Order Number - 111111

Sales Order Number - 2222333

Bill to ID - xxxxx

Ship to ID - xxxxxxxxx

Thanks in advance for all your help with this! Can you please email the new license to:

[email protected]

Hope this helps!

Rob

Correct Answer by Jaime Valencia about 7 years 3 months ago

You only use the MAC of the licensing server, if the PUB is going to be that server, then use that one for all licenses you want for the cluster.

HTH

java

if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jaime Valencia Wed, 10/07/2009 - 21:10

You only use the MAC of the licensing server, if the PUB is going to be that server, then use that one for all licenses you want for the cluster.

HTH

java

if this helps, please rate

BALAMURUGAN SINGARAM Wed, 10/07/2009 - 21:32

Thanks for light me, from your reply I understand that License Unified CM 7.0 7816 Appliance or Unified CM Device License, for both we should use PUBLISHER macaddress for lic file registration.

Could you please correct me if my understading is wrong .

Correct Answer
rob.huffman Thu, 10/08/2009 - 04:20

Hi Bala,

You are most correct! All CUCM Licenses should reference the Publisher MAC. The License should reflect 2 Nodes, 1 for Pub and 1 for Sub. The Subscriber MAC should not be used here.

Cisco Licensing is very,very good about re-homing these licenses when required. Just send an email to;

[email protected]

Something like this;

We recently aquired licenses tied to PAK xxxxxxxxxxx for our CUCM 7.x cluster. We have a License tied to MAC CCCDDDAAABBB and now require the license to be re-homed to our Publisher MAC AAABBBCCCDDD accordingly. We mistakenly tied the license to our Subscriber MAC CCCDDDAAABBB

Here is the pertinent info;

End User Name - Bobmart.com

Legal Address

City,Country

Purchase Order Number - 111111

Sales Order Number - 2222333

Bill to ID - xxxxx

Ship to ID - xxxxxxxxx

Thanks in advance for all your help with this! Can you please email the new license to:

[email protected]

Hope this helps!

Rob

Actions

This Discussion