10-08-2009 04:58 AM - edited 03-17-2019 09:51 PM
Hello
I have Call Manager 4.3, Cisco camera II, IP Phone 7911, Cisco Unified Video Advantage and Gateway 2811 with PRI ISDN.
When I call inside my company all is OK - audio and video call is successfully.
When I call outside from my IP phone 7911(outside my company) I get a bysy signal.
If is not running Cisco Unified Video Advantage outside call is successfully.
What is solution for this trouble?
Please, help...
10-09-2009 12:05 PM
Hi firends, check this:
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080093f62.shtml
voice-port 1/1:23
bearer-cap speech
All the best
David
10-12-2009 03:43 AM
It is solution!
I have try it and it work.
David, thank you very much.
10-12-2009 06:29 AM
Hi, thanks my friend.
Please rate if this help you
All the best
David
10-27-2009 12:59 PM
the link you'r post doesn't work.
please fix. to read the answer.
thanks
10-27-2009 11:11 PM
try this:
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080093f62.shtml
best regards
10-28-2009 01:10 PM
thanks for the link.
i'm store de pdf to the know how database
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: