10-08-2009 06:00 PM - edited 03-06-2019 08:03 AM
Dear All,
Kindly let me know, when do we create interface vlan in the router. Would appreciate if you can support with an example.
Thanks,
Ash
10-08-2009 06:51 PM
In a router the only time you will use a SVI is if you have some of the hwic etherswitch cards installed . The only way to put an address on those is to use a SVI and put the port in a vlan , you cannot make the etherswitch ports a routed port.
10-08-2009 07:30 PM
Glen,
Thanks for the prompt response, could you please share some scenarios/examples/case studies.
10-10-2009 09:27 AM
Ash,
Please refer to the documentation:
Regards
Edison.
10-09-2009 05:36 PM
Glen,
Understood the setup as required.Would appreciate if you can share some scenario etc.
Thnx
Ash
10-09-2009 09:44 PM
In the past , when the L3 switches are not popular , Creating vlan in the router is very often , but now ,L3 switches are very cheap , Vlan in router is not used as often as before.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: