10-08-2009 06:00 PM - edited 03-06-2019 08:03 AM
Dear All,
Kindly let me know, when do we create interface vlan in the router. Would appreciate if you can support with an example.
Thanks,
Ash
10-08-2009 06:51 PM
In a router the only time you will use a SVI is if you have some of the hwic etherswitch cards installed . The only way to put an address on those is to use a SVI and put the port in a vlan , you cannot make the etherswitch ports a routed port.
10-08-2009 07:30 PM
Glen,
Thanks for the prompt response, could you please share some scenarios/examples/case studies.
10-10-2009 09:27 AM
Ash,
Please refer to the documentation:
Regards
Edison.
10-09-2009 05:36 PM
Glen,
Understood the setup as required.Would appreciate if you can share some scenario etc.
Thnx
Ash
10-09-2009 09:44 PM
In the past , when the L3 switches are not popular , Creating vlan in the router is very often , but now ,L3 switches are very cheap , Vlan in router is not used as often as before.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide