static routing for http(s) traffic

Unanswered Question
Oct 9th, 2009

Hi

I have the following setup:

LAN1 with DHCP server 10.20.30.253 & Internet server as gateway for LAN with IP 10.20.30.254. Both are on the same subnet.

I have a remote site LAN2 which is getting DHCP from LAN1. That is working fine. However I need to route all http & https traffic from LAN2 to LAN1's .254 server.

Currently my router at LAN2 has gateway of last resort 0.0.0.0 0.0.0.0 LAN1

How can I make this router at LAN2 route all http & https only traffic route back to the http server (.254)?

TIA

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Fri, 10/09/2009 - 16:31

That is called PBR, if you search in the scrollbox you can get to the configuration guide or examples.

willemvwyk Thu, 10/15/2009 - 14:18

Hi

I am not sure if PBR will work as the WAN is on a /30 IP Range?

Another thought, can I build IP-IP tunnels between the sites and route these tunnels to the main site?

Actions

This Discussion