×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

MPLS EIGRP

Answered Question
Oct 10th, 2009
User Badges:

dear all,

pls suggest for following points


sorry for attching jpg file because it difficult to draw topology in notepad


issue


i am getting all the vpnv4 routes on all PEs, i am able to ping vrf IP of another PE but i am not able to ping client end MPLS ip from another PE but its pinging from local PE, although routes are not learning at CE

pls find attached config notepads



Correct Answer by Harold Ritter about 7 years 10 months ago

Sourabh,


You are not redistributing BGP into eigrp on the PE routers. That is why your CEs are not receiving the remote routes. you need to add something like this on all PEs:


router eigrp 2101

address-family ipv4 vrf MGL

redistribute bgp 10 metric 10000 1000 255 1 1500


Regards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Harold Ritter Sat, 10/10/2009 - 04:59
User Badges:
  • Cisco Employee,

Sourabh,


You are not redistributing BGP into eigrp on the PE routers. That is why your CEs are not receiving the remote routes. you need to add something like this on all PEs:


router eigrp 2101

address-family ipv4 vrf MGL

redistribute bgp 10 metric 10000 1000 255 1 1500


Regards

Actions

This Discussion